Comments
-
@MarkD that fixed it. I installed the NetExtender and now I have an IP for my network and can access network resources. Thank you MarkD!
-
I have the Global VPN Client version 4.9.22 installed. Yeah every video I saw didn't have enabling the VPN base settings WAN GroupVPN. I just thought that was an overlooked step. Before enabling I couldn't of course get Global VPN Client to work. Is there a different client I need to install, and is there an advantage or…
-
I too am interested in this.
-
@Frank_P This is how I have mine setup. I have my internal secure LAN on X0, WAN X1, Guest WiFi using the WiFi zone assignment on X6. I just ensure that there are no rules allowing X6 to X0, but I did have to create a rule to allow connections from my X6 guest interface to a specific IP on the X0 interface for a copier…
-
@Arkwright, So the references to X6 is not saying that packets are trying to go to or come from X6 to the X0 interface? I'm just curious because the two interfaces do not have trust and I would assume that they wouldn't try to connect or send packets to one another. Thanks!
-
@Arkwright The capture filter is only looking for traffic coming from an IP on my network. I've not filtered out ports or destination. I'm looking for any packets that are dropped. In my case it seems like packets are being dropped intermittently. I'm not for sure if this is a Firewall issue. They can access the site some…
-
@Arkwright No I want to see all the traffic from a particular IP, but I couldn't understand why X6 was even in the equation. The X0 interface is my LAN and X6 is my Public network and they are segmented, so I don't know why X6 is even showing up in the packet monitor. I'm not for sure if the SonicWALL is the issue in my…
-
@LEE_S2022 I'm curious about this myself. I have a VPN gateway that is connecting my site to a vendors site and now the vendor site is failing connection requests. I can't ping the vendor site and when I look through the packet monitor I'm seeing packets being dropped with the error code similar to yours. Ethernet Header…
-
@TonyA & @BWC I've re-enabled my app control and gone into the configurations and set up the app control exclusion list to use the IPS exclusion list and it seems to be working for now. Hopefully this did the trick. Thank you both so much for all your help!
-
@TonyA I went in and disabled app control and it's now connecting. I'm going to try to determine what is causing it to drop through the app control. @BWC
-
Hey Michael @BWC , Yeah I went in and checked the rule I set up. I also attached the rule for the WAN - New Zone and the New Zone - Wan rules.
-
Hey @BWC I had never used that feature on the SonicWALL before. Great to know it's there. I setup the packet capture and I can see where packets are being dropped, and on one specific entry I can see where packets originating from my endpoint going out to the server for the streaming service is being dropped. It's showing…
-
Hey @BWC I created a separate zone and disabled all of the security features, the endpoint is on its own interface with its own subnet, and I created 2 rules, one from WAN to the new zone and one from the new zone to the WAN and made sure to allow any port, any service, and to disable any of the security services…
-
@MustafaA There is only 1 endpoint at the facility that needs these special permissions setup. I could put the endpoint on it's own interface with its own subnet so that the communication to other devices is limited. I can create a new zone where nothing is blocked or inspected to see if it works, unless there is a way to…
-
@andyoeft I'm still researching this issue. If you found a way please let me know, but I believe the only solution currently is to do what @Ajishlal mentioned above and that was to Install a WAN switch in front of the Sonicwall and connect the two ISP connections from the same subnet, then on the Sonicwall, assign a static…